Browse Ads
Post Ad
Post a Free classified ad today!
My Gumtree
Discussion
Help
All Ads
Sydney Change
Gumtree Sydney > Stuff for Sale > musical instruments > Ad ID 166439648
 

E-MU 1820M Professional Soundcard and Breakout box
  • Share
  • |
  • Print
  • |
  • Report Ad  
View larger image
Date Listed 04/11/2009
Price $327.00
Address Glebe NSW, Australia
View map
Howdy, for sale is the E-MU 1820M.
This unit is second hand. Its in excellent condition. Hardly used.
* There is only 1 unit.
* I have all the included components except the manuals and cds.
* I do not have the original packaging.
* The drivers are available from the website.

If you have this unit you are able to run Emulator X1 and X2.

Here are some of the Specifications below

General
            Sample Rates: 44.1, 48, 96, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)
            Bit Depths: 24-bit I/O, 32-bit processing
            PCI Specification:
- PCI 2.2 Compliant
- Form Factor: Universal Keyed, Short PCI Card
- 3.3V I/O, 5V Tolerant
- PCI Bus-Mastering DMA subsystem reduces CPU usage
            E-MU® E-DSP™ 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)
            Hardware-accelerated, 32 channel mixing, and multi-effects processing
            Zero-latency direct hardware monitoring w/effects
            ASIO 2.0, Stereo WDM/MME/DirectSound Drivers
            EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable
            Anti-Pop speaker protection minimizes noise during power on/off
            Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Analog Line Inputs (6)
            Type: servo-balanced, DC-coupled, low-noise input circuitry
            A/D converter: AK5394A
            Level (software selectable):
- Professional: +4dBu nominal, 20dBu max (balanced)
- Consumer: -10dBV nominal, 6dBV max (unbalanced)
            Frequency Response (20Hz-20kHz): +/- 0.05dB
            Dynamic Range (1kHz, A-weighted): 120dB
            Signal-to-Noise Ratio (A-weighted): 120dB
            THD+N (1kHz at -1dBFS): -110dB (.0003%)
            Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Analog Line Outputs (8)
            Type: balanced, low noise, 3-pole low-pass differential filter
            D/A converter: CS4398
            Level (software selectable):
- Professional: +4dBu nominal, 20dBu max (balanced)
- Consumer: -10dBV nominal, 6dBV max (unbalanced)
            Frequency Response (20Hz - 20kHz): 0.0/-0.35dB
            Dynamic Range (1kHz, A-weighted): 120dB
            Signal-to-Noise Ratio (A-weighted): 120dB
            THD+N (1kHz at -1dBFS): -105dB (.0006%)
            Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Combo Microphone Preamplifier/Line Inputs (2)
            Type: TFPro™ combination microphone preamp and line input
            Frequency Response (20Hz - 20kHz): +0.8/-0.1dB
            Dynamic Range (A-weighted, 1kHz min gain): 100dB
            Signal-to-Noise Ratio (A-weighted, min gain): 100dB
            THD+N (1kHz at -1dBFS, min gain): -94dB (.002%)
            Stereo Crosstalk (1kHz min gain, -1dBFS): < -115dB
            Line Input:
- Input Impedance: 10Kohm
- Max Level: +17dBV (19.2dBu)
- Gain Range -12 to +28dB
            Microphone Preamplifier:
- Input Impedance: 330ohms
- Max Level: -12dBV (-9.8dBu)
- Gain Range: +10 to +50dB
- Phantom Power: 48V

Contents
            E-MU 1010 PCI Card
            E-MU AudioDock M
            E-MU Sync daughter card
            EDI (E-MU Digital Interface) cable (3 meters)
            Sync cable
            Mini-DIN MIDI adapter cable
            Headphone splitter cable
            PC power cable
           
Hope to hear from you soon.
Cheers

Bill

Visits: 81


Poster Contact Information
ANTI SPAM: Do not contact me offering services or anything of commercial nature.


Important Safety Warning:
Avoid fraud by meeting all sellers in-person to pay for items. Gumtree does not offer any transaction or payment services.
Read safety tips | Discussion